Xixun Brief Manual
XIXUN Brief Manual, LED Control System, XIXUN system configuration, LED control software
LeemanDisplay is specialized in LED display R& D, production and manufacturing companies, we are committed to providing customers with a variety of ? LED Display Solutions ? , and to provide you with quality products pre-sales, after-sales service.
Hardware connection is illustrated with the image 1-1 below:
① Connecting control card with HUB by flat cable firmly;
② Connecting HUB J1 port with input port of LED screen by flat cable;
③ Accessing to power line and network;
④ After the control card is connected power, all the indicator lights (power, network and working )are to turn on and the working light is twinkling, which means that the control card is operating normally.
Connecting computer with led screen by internet cable, as follows 1-2.
Operating system: Simplified Chinese, Traditional Chinese or English WINDOWS XP,Vista.
Hardware Configuration: CPU：Pentium 600MHz or above; ROM: 512M; Graphics card: Standard VGA 256 mode or above.
Related Software: Microsoft Media Player – compulsory.
2.2.1 "LED Editor"software
Firstly put the "LED Editor" installation CD into the CD-ROM, then the Installation menu will automatically pop up, (If not, please select this CD-ROM and double-click it).Secondly, as Figure2-2 shows, select “LED Editor_Setup.exe” and operate the software installation as the installation guide.
After "LED Editor"software has been successfully installed, there will be a "LED Editor" short-cut on your desktop, and users can start the program by double click on the icon.
The software has been set before shipment by us, so no details are available here. As to he installation procedure,please refers to that of software <Led Editor>
If LED Set2.0 can automatically detect the IP address, this step can be ignored. If not, manual setup is needed. Specific steps are as follows: Right click “Network Neighborhood”, choose “Properties”, open “Network Connection”, then right click “Local Connection” and choose “Properties”(see Image 3-1 below)
Please set up IP according to the notes in image 3-1, then click on"Property"button, a dialogue box will appear, as shown in image 3-2
After finishing all the settings, please click “ok” .Note the setting of IP address is subject to 192.168.0.210.
Click”Help” button in the menu bar of the <<LED Editor>> software, then choose “Auto check LED sign IP” in the list to bring out a dialogue box. , as shown in Image3-3 and Image 3-4 below. And you can view the LED screen IP address in Image 3-4.
Tel.: +86 755 8690 2546
Wechat: +86 159 8985 4145
Mob.: +86 159 8985 4145
Whatsapp: +86 159 8985 4145
Copyright ? Leeman Display Technology Limited. All Rights Reserved | Sitemap |